Had an accident or need a back seat refresh? Here's an in-depth insight into removing your Radian® 3QXT® FirstClass™ SafePlus™ car seat covers quickly and easily:
Top tip! The rear-facing base can be used as a stand to help support the seat while removing and installing the cover.
Removing the cover:
- Step 1: Note which harness slots your child is using. Remove the harness straps from the adjuster strap and pull them through the front.
- Step 2: Raise the adjustable head support to its highest position and remove the cover.
- Step 3: Remove the fabric from the channel around the seat's shell.
- Step 4: Lower the head support to its lowest position. Undo the top fabric panel by removing the buttons in each lower corner of the panel.
- Step 5: Remove the elastic loops holding the lower fabric panel in place. Raise the head support and fold the fabric panel down.
- Step 6: Remove the elastic strap from the small tab on the lower side of the seat shell. A pen or similar tool will help guide the elastic around the tab. Repeat on the other side.
- Step 7: Remove the cover from the seat shell. Begin by lifting the front of the cover and pulling the crotch buckle through the cover. Lower the head support and pull the cover off the seat shell.
- Step 8: If present, remove the white foam piece. Remove the memory foam. Depending on your seat's model, the memory foam may be inserted differently in the cover. The cover is now ready to be cleaned per the instructions in your manual.
Discover replacement car seat covers for your Radian® 3QXT FirstClass™ SafePlus™ here.
Please follow the step-by-step instructions located in your product manual. Click here for the Radian® 3QXT® FirstClass™ SafePlus™ manual.
For further instructions, please get in touch with Customer Support by clicking here.
Watch the video below to learn step-by-step how to remove and replace your Radian® 3QXT® FirstClass™ SafePlus™ car seat cover from our CPST expert below:
Comments
0 comments
Please sign in to leave a comment.